White Paper: Continuous Methane Measurement (abstract)
Equivalency Evaluation of Regulator-Approved Alternative Leak Detection and Repair Program in Alberta, Canada
Authors: Tim Benko; Alex MacGregor; Eric Wen; Thomas Fox; Brendan Moorhouse
Paper presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, USA, October 2022.
Paper Number: SPE-209973-MS
Abstract:
Diverse methods have emerged for methane Leak Detection and Repair (LDAR), alongside a growing interest in continuous measurement (CM). Novel LDAR programs must demonstrate equivalent (or better) emissions reductions compared to conventional handheld methods to be approved by regulators and trusted by industry.
We apply and test a widely accepted equivalency framework and report on a regulatory approved alternative LDAR pilot program to evaluate the performance of CM relative to conventional LDAR. The framework, which has not been formally tested to date, relies on a combination of controlled release testing, simulation modeling, and field piloting.
First, controlled release testing at known emission rates is used to establish probability of detection functions and other performance metrics for the CM device. Performance metrics are then used to build a CM module in LDAR-Sim, an open-access modeling framework. Finally, CM devices are deployed as part of a field pilot.
Controlled release testing results and dispersion modeling suggest that the CM devices can reliably detect (i.e., 90% detection probability or greater) a rate of 1 kg/h (~54 scfh) from distances of 75 to 100 meters with no false positive detections.
A set of work practices were established using the LDAR-Sim framework. The CM program requires close-range follow-up for any detection event and is estimated by LDAR-Sim to reduce aggregate annual fugitive methane emissions by 91.8% relative to the baseline, doubling the reductions anticipated from a conventional regulatory program. For the pilot, 52 devices are deployed across 16 facilities with Enhance Energy. All devices are positioned within 100 m of monitored assets. Each time devices record a detection event, which is defined as a sustained anomaly three standard deviations above a moving average background concentration for 24 hours, 7 days or 60 days, the operator performs a close-range follow-up inspection.
Preliminary results show that the CM devices can detect leaks and that follow-up protocols are effective at immediately finding leaks and avoiding false positives. Confirmed detections include fugitive emissions such as a tank thief hatch leak and vented emissions including high bleed pneumatics. Both types of emissions were confirmed as repaired or improved by CM. These results indicate that repairing leaks more expeditiously through faster detection can reduce emissions by up to 90%.
- Copyright 2022, Society of Petroleum Engineers DOI 10.2118/209973-MS
To access the complete paper, please contact Qube Technologies. This paper is also available for purchase at OnePetro.org.